BABY HEALTH CARE, INC.
CN

PRODUCT

  1. Home
  2. Products
  3. SIDS Prevention Alarm
SIDS Prevention Alarm

SIDS Prevention Alarm
BabyAlarm E-201

Description

Safeguard the Baby Every Minute 
Baby Alarm – A dynamic monitoring system that detects babies' normal breathing


The high-performance sensor of Baby Alarm is built into the sensing board, capable of accurately monitoring even the slightest breath of the baby. If there is no detection of the baby's breathing or heartbeat within 20 seconds, an alarm will sound to alert caregivers.

Small medical device for home use

Compared to the equipment used in hospitals, this dynamic monitoring system is affordable, making it easy for parents to ensure their baby's safety at home.

Dr. Hisashi Kawashima, a Japanese pediatrician

There are risks for infants during sleep, such as Sudden Infant Death Syndrome (SIDS), which can cause the baby to die without any warning signs, including accidents such as falling off the bed or suffocation by bedding. When the baby appears to be in an abnormal condition, an ambulance should be called immediately for emergency treatment.

Product Instruction:

1. Place the sensor board under the mattress or blanket, and turn on the power to use. (Suitable for mattresses with a thickness of 6cm or less).
2. If there is no detection of the baby's breath or heartbeat for 20 seconds, the alarm will sound to alert caregivers.

※Important Notes※

Baby Alarm is not intended to prevent Sudden Infant Death Syndrome (SIDS), cot death, crib death, or assess sleep disorders such as sleep apnea. Parents and caregivers should regularly check the baby's condition and not rely solely on the information provided by the baby breathing monitor. The baby breathing monitor uses sensors to detect the baby's body movements, including breathing, and therefore cannot generate correct data if someone else is sharing the bed. Additionally, it is not recommended to use the device while in a moving vehicle, such as a car seat or stroller.
Inquire about this product
Product Name Baby Movement Sensor BabyAlarm E-201
Power Source 3 x AA Alkaline batteries (Not included in package)
Rated Voltage DC4.5V
Battery Life 8 hours a day / About 1 month
Operation Condition +5℃~+35℃, 15%~93%RH
Transport and Maintenance Conditions -10℃~+65℃ ,10%~85%RH
Sensing Triggers an alarm if babies’ breathing or heartbeat is not detected for 20 seconds or longer
Size / Weight Controller：Approx. W70 x H70 x D35mm / Approx. 61g（※Batteries excluded）
Sensor board：Approx. W280×H300×D12mm / Approx. 420g
Materials Controller: ABS
Sensor board: PP
Accessories Controller, Sensor board, Sling, Instruction manual and warranty card
Suitable for User weight 2kg~10kg
User Age 0 ~ 12 months
Medical Device Certification Number 13B1X10068000203
JMDN Code 70074000